Quantcast Maintenance Services and Inspections - TM-9-2330-329-14-P0574

Custom Search
 
  
 


TM 9-2330-329-14&P
PREPARATION FOR STORAGE OR SHIPMENT--Continued
0136 00
2.
Take into account environmental conditions, such as extreme heat or cold, high humidity, blowing
sand, dust or loose debris, soft ground, mud, heavy snows, earthquakes, or combinations thereof
and take adequate precautions.
3.
Establish a fire plan and provide for adequate fire fighting equipment and personnel.
Maintenance Services and Inspections
Prior to storage, perform the next scheduled major preventive maintenance service (semi-annually or
annually).
Basic Issue Items (BII)
1.
Process BII simultaneously with the semitrailer to which they are assigned. If possible, store BII
with the semitrailer.
2.
If stored apart from the semitrailer, label BII with tags designating the vehicle, its registration, or
serial number and location and store in protection-type closures.
3.
In addition, place a tag or list indicating the location of the removed items in a conspicuous place in
the semitrailer.
Corrections of Shortcomings and Deficiencies
Correct all shortcomings and deficiencies prior to storage, or get a deferment from the approving
authority.
Lubrication
Lubricate equipment in accordance with applicable lubrication instructions (WP 0034 00, 0042 00) of this
manual.
General Cleaning, Painting, and Preservation
1.
Clean dirt, grease, and other contaminants from the equipment in accordance with this manual
CAUTION
Do not direct high-pressure water or steam against air
cleaner, air duct outlets, exhaust outlets, unsealed electrical
systems, Automatic Fire Extinguishing System (AFES)
equipment, or any exterior components. Moisture will cause
electrical malfunctions. Condensation in ducts can
cause corrosion.
2.
After cleaning and drying, immediately coat all unpainted metal surfaces with oil or grease as
appropriate.
0136 00-3



 


Privacy Statement - Copyright Information. - Contact Us

Integrated Publishing, Inc.