Custom Search
 
  
 


TM 9-2330-329-14&P
OVERFLOW PROTECTION MONITOR PANEL REPLACEMENT--Continued
0046 00
2.
Loosen two screws (11) and disconnect two power wires (10) from sensor pack (13).
NOTE
Wires are color coded at strips for easy identification.
3.
Loosen 10 screws (12) and disconnect 10 wires (14) from terminal strip (15).
4.
Loosen five screws (16) and disconnect five wires (18) from terminal strip (17).
5.
Remove four screws (19) and sensor pack (13) from base (6).
INSTALLATION
1.
Install sensor pack (13) and four screws (19) to base (6).
2.
Connect five color coded wires (18) to terminal strip (17) and tighten five screws (16).
3.
Connect 10 color coded wires (14) to terminal strip (15) and tighten 10 screws (12).
4.
Connect two power wires (10) to sensor pack (13) and tighten two screws (11).
0046 00-2



 


Privacy Statement - Copyright Information. - Contact Us

Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business