OPERATION UNDER USUAL CONDITIONS--Continued
WHEEL ASSEMBLIES REPLACEMENT
Replace wheel with semitrailer connected to prime mover if
possible. If semitrailer is not connected to prime mover ensure
that landing gear is lowered and locked and wheels are chocked.
Failure to follow this warning may cause semitrailer to roll resulting
in injury to personnel or damage equipment.
There are four wheel assemblies and they are replaced the
same way. This procedure covers one wheel assembly.
Loosen but do not remove 10 nuts (2) while wheel assembly (1) is in contact with ground.
Wheel assembly is heavy. Use two people to remove wheel
assembly from studs. Failure to follow this warning could
result in injury to personnel.
Raise axle so wheel assembly (1) is off ground.
Remove 10 nuts (2).
Remove wheel assembly (1).