Custom Search
 
  
 


TM 9-2330-329-14&P
OPERATION UNDER USUAL CONDITIONS--Continued
0007 00
Mounting
1.
Roll spare tire (4) onto ladder (8). Route cable (3) through ventilation holes in spare tire (4) and
hook to ladder (8) between 1st and 2nd rungs from bottom.
WARNING
Spare tire and ladder are heavy. Make sure cable is not frayed
or damaged. Do not raise spare tire and ladder past the vertical
position or they will slam into carrier assembly. Failure to heed
this warning may result in severe injury to personnel or damage
to equipment.
2.
Rotate winch handle (9) until spare tire (4) and ladder (8) are nearly vertical, with weight still
supported by cable (3).
3.
Carefully push spare tire (4) and ladder (8) in until resting against carrier assembly (1).
4.
Install two quick release pins (2) in ladder (8) and carrier assembly (1).
5.
Install reinforcement channel (5) to studs (7) with two nuts (6).
6.
Rotate winch handle (9) until cable (3) is tight and winch handle (9) is pointing down.
0007 00-25



 


Privacy Statement - Copyright Information. - Contact Us

Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business