Quantcast DISCONNECTING PRIME MOVER FROM M967A2 (Cont)

Custom Search
 
  
 


TM 9-2330-329-14&P
OPERATION UNDER USUAL CONDITIONS--Continued
0007 00
NOTE
M967A2 air brakes will set automatically when service air
brake hose is disconnected.
3.
Disconnect emergency and service air lines from emergency and service air couplings on M967A2.
4.
Install dummy couplings (3) in M967A2 service and emergency air couplings.
5.
Disconnect 12 and 24 volt prime mover cables from M967A2 cable connectors.
6.
Open drain valve (4) on reservoir (5).
7.
Release landing gear operating crank (12) from clip (11).
8.
Rotate crank (12) counterclockwise to lower landing gear legs (10) until they are firmly on the
ground or on the ground boards (8).
9.
Replace crank (12) in clip (11) and secure.



 


Privacy Statement - Copyright Information. - Contact Us

Integrated Publishing, Inc.