Times are for one axle only.
Times are for one axle end only.
Times are for each component/assembly.
Annual service to UV protect decking.
1.5 hours to replace each board.
Reference TB 9-2510-242-40.
Unit level checks only the axle alignment.
Tire is re-treadable, tire is not on a re-tread program.
Component comes as an assembly only.
New suspension hardware requires wet (oiled) torque values. In service hardware
requires dry torque values.
Spot painting, tire air/pressure check, oil can points, and cleaning for all like
Frame deficiencies need to be evaluated at the DS level to determine the events of
repair. Some minor deficiencies may be handled at DS. Major repairs such as
cracks and damage that requires alignment must go to GS.
A correct size seal driver must be used to prevent damage/cocking of seal. Hub
bore must be clean and seal bottomed.
Dielectric grease must be used on pins and connectors.