| Tweet |
Custom Search
|
|
|
||
 TM 9-2330-326-14&P
b. Installation.
1.
Replace any damaged grommets (1113) as necessary.
NOTE
Use dielectric grease on all pins.
2.
Install BO socket wiring harness (6) and main wiring harness (10).
3.
Install two PL10 marker wiring harnesses (8) to BO socket wiring harness (6).
4.
Install two PL10 wiring harnesses (9) to two front marker lights and two PL10 marker wiring
harnesses (8).
5.
Install midturn ABS wiring harness (7) to two midside clearance lights and main wiring harness
(10).
6.
Install ABS main wiring harness (5) to ABS warning light, rear wiring harness (4), and main
wiring harness (10)
7.
Install wiring harness (3) to rear clearance lights, and rear wiring harness (4).
8.
Install wiring harness (2) to two BO lights and BO light wiring harness (6).
9.
Install two wiring harnesses (1) to taillights, side clearance lights, and rear wiring harness (4).
c.
Follow -On Tasks.
1.
Connect semitrailer to prime mover.
2.
Raise landing legs.
3.
Remove/store chocks and ground boards.
4.
Chock to ensure lighting system isoperational.
6-17
|
||
|
||
