Quantcast Table 4-1. Unit PMCS. (Cont) - TM-9-2330-326-14-P0064

Custom Search
 
  
 


TM 9-2330-326-14&P
Table 4-1. Unit PMCS (Cont.)
ITEM
INTERVAL
ITEM TO
EQUIPMENT NOT
NO.
M
S
A
T
MI
CHECK/SERVICE
PROCEDURE
READY/
AVAILABLE IF:
CAUTION
Any  bumps,  valleys,  or
warping of the bolster plate
will cause uneven loading of
the fifth wheel, which could
result in damage to the top
plate and poor lock life.
CAUTION
The bolster plate should not
bow upward (concave) more
than  1/16  in.  (1.58  mm)
within  a  19-in. (48.26-cm)
radius from kingpin.
The bolster plate should not
bow  downward  (convex)
more than 1/4 in. (6.35 mm)
within  a  19-in.  (48.26-cm)
radius from kingpin or more
than 1/8 in. (3.18 mm) at a 10-
in.  (254-mm)  radius  from
kingpin.
2
M
S
A
T
MI
Bolster Plate
a.
Clean bolster plate and kingpin. (See
Every
Appendix H-13.) Regrease after
?
6,000
checks are completed.
b.
Check flatness of bolster plate using
Bolster plate
a 48 in. (1.22 m) straight edge.
exceeds bowing
Check flat edge in all directions.
criteria.
4-4



 


Privacy Statement - Copyright Information. - Contact Us

Integrated Publishing, Inc.