Quantcast PUMP AND PLUMBING BLOW-OUT PROCEDURE. (Cont) - TM-9-2320-279-10-30249

Custom Search

TM 9-2320-279-10-3
Operation Under Usual Conditions (Cont)
l. Remove air hose (10) from stowage.
Be careful when using high air pressure. Make sure
connections and seals are tight before applying
pressure. High air pressure can blow out parts, hoses,
or debris with force. Explosive force can cause
damage to equipment or injury to personnel.
Wear single hearing protection (earplugs or
equivalent) while working around compressed air.
Failure to comply may result in damage to your
hearing. Seek medical aid should you suspect a
hearing problem.
Air pressure should not exceed 50 psi (345 kPa)
during blow-out procedure. Failure to comply may
result in damage to equipment. Failure to comply
may result in injury to personnel.
m. Connect air hose (10) to blow-out adapter (7) on PASSENGER SIDE
AUXILIARY INLET (6) and regulated air supply.
n. If using vehicle for air supply, start vehicle (TM 9-2320-279-10-1,
para 2-11).


Privacy Statement - Copyright Information. - Contact Us

Integrated Publishing, Inc.