Preventive Maintenance Checks and Services (PMCS) (Cont)
Table 2-9. Operator/Crew Preventive Maintenance Checks and Service (PMCS) (Cont)
NOTE: These checks are to be made in the order listed, within designated interval.
ITEM TO BE INSPECTED PROCEDURE:
Check for and have repaired, filled, or adjusted
No. A D W M
WATER PUMP ENGINE.
Gages, Indicators, and Warning Lights
During operation, all gages should maintain
a. Start water pump engine (para 2-113).
b. Monitor all gages, indicators, and warning lights
for proper reading while operating vehicle.
c. Check the following gages for proper operation:
OIL PRESSURE - Minimum oil pressure with
engine warm and low idle speed is 12 psi
ENGINE TEMP - Operating range is
VOLTAGE - 24 volt.
Water Pump Engine
Visually check and/or listen for excessive smoke,
unusual noise, rough running, or misfiring.