Storage Site Selection. Inside storage is preferred for items selected for administrative storage. If inside storage is
not available, the sites selected should provide required protection from the elements and allow access for visual
inspection when applicable.
Preparation for Shipment. Prior to shipment all overpack containers (and their contents) and spill kit shall be
secured inside Mod Lab B in accordance with Figure 3-4. Each group of containers is secured using a supplied
2-piece frame and strapping. Two straps are used to secure the 2-piece frame to the overpack boxes. A third strap is
used to secure the 2-piece frame and overpack box group to the trailer tie down rings located along the laboratory
aisle floor. Boxes 1 thru 16 are large overpack boxes, 17 thru 19 and 22 are medium sized boxes, and 20 and 21 are
small overpack boxes. Starting with the front of the trailer the overpack boxes are installed in groups as follows:
Boxes 17, 18, 20, and 21, 9, 14, and 16, 12 and 19, 8, 10, and 11, 4, 15, and 22, 3, 6, and 7, 1, 2, and 5, and 13.
Air Shipment. Chemicals must be stored in original or same as cardboard boxes when received so that movement in
overpack boxes is minimized to maximum extent. Only unopened chemicals can be packed for air shipment.