Install Electric Still. See Figure 3-3.
Install retaining ring (13) on still (9).
Install elbow (6) on still (9).
Place still (9) with retaining ring (13) on still shelf and secure with five screws (10), lockwashers (11), and
Attach supply hose (8) to still (9) and tighten clamp (7).
Attach drain hose (5) to elbow (6) and tighten clamp (4).
Install Distilled Water Container.
Lift up on container (2) inserting tube (3) into top of container and lower container into place on still shelf.
Secure container (2) with retaining strap (1).
Plug stills power cord into convenience outlet.
Perform an operational check on still.
When maintenance is required for portable equipment and requires no permanent
mounting, the equipment should be removed from its storage in Mod Lab B and
handled, packaged, adjusted, repaired or replaced in accordance with their
respective TMs listed in Appendix A.