Custom Search

TM 10-6640-238-13 5-47 5-22.    FREEZER (ICE CUBE MAKER). This task consists of: a.   Remove b.   Install INITIAL SET-UP Tools Required General Mechanics Tool Kit, (Appendix B, Section III, Item 1) Materials/Parts Required Lockwasher, (6) Personnel Required Two (2) Equipment Conditions Centrifuge Removed (Paragraph 4-46) General Safety Instructions WARNING ELECTRICAL SHOCK Before performing any  maintenance actions on electrical equipment, ensure  all electrical power has been turned off.   Failure to comply with this warning may result in serious injury or death. REMOVE Remove Freezer.  See Figure 5-18. a. Unplug freezer from wall receptacle in mechanical room. b. Remove four screws (1), two screws (2), washers (3), and front panel (4). WARNING The  freezer  is  heavy.    To  prevent  injury,  two  people  are  required  to  remove freezer from mounting base. c. Remove two screws (5), lockwashers (6), and washers (7), and lift freezer (8) from mounting base (9).  Discard lockwashers. d. Open cabinet doors D for access to mounting base (9) hardware. e. Remove four screws (10), lockwashers (11), and washers (12) from bottom of countertop (13).  Discard lockwashers. f. Remove mounting base (9) from countertop (13).


Privacy Statement - Copyright Information. - Contact Us

Integrated Publishing, Inc.