TM 10-6640-238-13
4-188
4-76. FLOWMETER KIT AND BRACKETS.
This task consists of:
a.
Remove
b.
Install
INITIAL SET-UP
Tools Required
General Mechanics Tool Kit, (Appendix B, Section III, Item 1)
Portable Electric Drill, (Appendix B, Section III, Item 2)
Twist Drill Set, (Appendix B, Section III, Item 2)
Hand Blind Riveter, (Appendix B, Section III, Item 3)
Materials/Parts Required
Rivets, (4)
REMOVE
Remove Flowmeter Kit and Brackets. See Figure 4-72.
a.
Open cabinet S to gain access to hardware.
b.
Loosen strap (1) and remove flowmeter kit (2).
c.
Remove four rivets (3) and two brackets (4).
INSTALL
Install Flowmeter Kit and Brackets. See Figure 4-72.
a.
Install two brackets (4) and secure each with two rivets (3).
b.
Install flowmeter kit (2) and tighten strap (1).
|
|
