( 10) Disconnect and s;toL\ grotmdiny equipment as refcrcnccd in paragraph 2-O
b. Dispensing Liquid.
When dispensing liquid, attend the nozzle constantly:
Do not wedge open or block the control lever on the nozzle.
(I) Locate dispensin
g unit adjacent to the equipment to be fueled.
Refer to paragraph 3-V and perform grounding procedures. 1,ocate safet> equipment.
Liquids \\ill be dispensed from tank through the bottom loading valve (2. Figure 3-7)
by gravity flo\\
Connect hose (5. Figure 3-8) and nozzle (6. Figure 3-8) to the Fuel Manifold bottom
loading valve coupling ( 12. Figure 2-8).
Connect nozzle grciund
clamp ( IO, Figure 2-8) or notzle ground plug ( 13. Figure 2-8)
to equipment being ser\,iced. whichever is compatible.
Dispensing Fuel Set-up