| Tweet |
Custom Search
|
|
|
||
 TB 9-2330-381-14-1
2-3.
DUAL WINCH LOADING AND UNLOADING DISABLED PAYLOAD WITH MINE CLEARING BLADE
ATTACHED (CONT)
(90) Push ENGINE SPEED CONTROL switch (31) to HIGH ENGINE IDLE.
(91) Momentarily push ENGINE SPEED CONTROL switch (32) to lock engine speed at high engine idle
(approximately 1,500 rpm) and then release switch.
(92) Push WINCH SPEED CONTROL SWITCH (36) to HIGH.
(93) Remove driver's side winch cable (35) from gooseneck cable guide (33) and pivot pin sheave (50).
(94) Leave driver's side winch cable (35) on semitrailer platform.
(95) Remove passenger side winch cable (23) from gooseneck cable guide (33).
(96) Leave passenger sid e winch cable (23) on semitrailer platform.
WARNING
Do not allow hands to get between clevis and winch or serious injury to personnel
may occur.
(97) With one person to push down on DRIVERS SIDE WINCH lever (34) and one person to maintain tension
on driver's side winch cable (35), retract and stow winch cable (35) onto stow hook (24).
(98) Release DRIVERS SIDE WINCH lever (34).
(99) With one person to push down on PASSENGER SIDE WINCH lever (22) and one person to maintain
tension on passenger side winch cable (23), retract and stow winch cable (23) onto stow hook (24).
(100) Release PASSENGER SIDE WINCH lever (22).
(101) Pull ENGINE SPEED CONTROL switch (31) to LOW ENGINE IDLE.
(102) Lower guard (9) and lock in place.
2-90
|
||
|
||
