Custom Search
 
  
 


TB 9-2330-381-14-1
2-3.
DUAL WINCH LOADING AND UNLOADING DISABLED PAYLOAD WITH MINE CLEARING BLADE
ATTACHED (CONT)
WARNING
The driver's side winch cable will be used to pull the payload back, and the
passenger side winch cable will be used to restrain the payload. Do not allow the
driver's side winch cable to pull against the passenger side winch cable or serious
injury to personnel and damage to equipment may occur.
(58) Engage DRIVERS SIDE WINCH KICKOUT by pushing DRIVERS SIDE WINCH KICKOUT switch (19).
(59) Push down DRIVERS SIDE WINCH lever (34) to move payload back onto free payload chock (38) and free
payload chock (37) and pull up PASSENGER SIDE WINCH lever (22) enough to allow payload to move
without excess slack in passenger side winch cable (23).
(60) Release DRIVERS SIDE WINCH lever (34) and PASSENGER SIDE WINCH lever (22) when payload
tracks are on free payload chock (38) and free payload chock (37) and front tiedown chains (39) are loose.
(61) Remove two tiedown chains (39) and payload tiedown shackles (41) from rear of payload.
(62) Lay tiedown chains (39) and payload tiedown shackles (41) forward toward center of platform.
(63) Engage PASSENGER SIDE WINCH KICKOUT by pushing PASSENGER SIDE WINCH KICKOUT switch
(20).
(64) Push down PASSENGER SIDE WINCH lever (22) to move payload forward to front payload chocks (42)
and pull up DRIVERS SIDE WINCH lever (34) enough to allow payload to move.
(65) Release DRIVERS SIDE WINCH lever (34) and PASSENGER SIDE WINCH lever (22) when payload
makes firm contact with front payload chocks (42).
(66) Remove free payload chock (38) and free payload chock (37) from front of payload tracks and place on
ground.
2-84



 


Privacy Statement - Copyright Information. - Contact Us

Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business