| Tweet |
Custom Search
|
|
|
||
 TB 9-2330-381-14-1
2-3.
DUAL WINCH LOADING AND UNLOADING DISABLED PAYLOAD WITH MINE CLEARING BLADE
ATTACHED (CONT)
(k) Engage DRIVERS SIDE WINCH KICKOUT switch (19) and PASSENGER SIDE WINCH KICKOUT
switch (20) by pushing on each switch.
(l) Push CABLE HOLD DOWN lever (21) to ON.
(m) Pull PASSENGER SIDE WINCH lever (22) upward momentarily until there is enough slack in
passenger side winch cable (23) to be removed from stow hook (24).
(n) Move clevis on passenger side winch cable (23) off stow hook (24) to unstow winch cable (23).
(o) Continue paying out passenger side winch cable (23) until spotter on ground can reach clevis.
(p) Release PASSENGER SIDE WINCH lever (22).
(q) Remove and retain cotter pin (25) and shouldered pin (26) from clevis on passenger side winch cable
(23).
(r) Remove cotter pin (27) and shouldered pin (28) from auxiliary winch cable clevis (29).
(s) Install auxiliary winch cable clevis (29) over one ear of clevis on passenger side winch cable (23) and
install shouldered pin (28) and cotter pin (27).
(t) Engage AUXILIARY WINCH KICKOUT by lifting and rotating AUXILIARY WINCH KICKOUT lever
(10) clockwise (CW).
(u) Disengage PASSENGER SIDE WINCH KICKOUT switch (20) by pulling on switch.
2-56
|
||
|
||
