DUAL WINCH LOADING AND UNLOADING DISABLED PAYLOAD WITH MINE CLEARING BLADE
Load semitrailer on level ground whenever possible. in adverse conditions,
loading can be done on grades up to 10 percent. Due to the possibility of winch
cables piling up against the end flanges of the cable drums and causing serious
injury to personnel and damage to equipment, the following offset limits between
tractor and semitrailer must be adhered to: 10 Left; 4 Right.
(6) Visually check tractor/semitrailer offset angle. Make any required adjustments to tractor by having spotter
check relationship between steering wedge bolt and weld circle at bottom rear of pickup plate. If inside
edge of bolt aligns with outside edge of weld circle, offset angle is 10 degrees. Make any required
adjustments to tractor.