Quantcast INSTALLATION (Cont) - TB-9-2330-337-140047

Custom Search
 
  
 


TB 9-2330-337-14
INSTALLATION (continued)
84. Align slider support bracket (3) with scribed mark on support bracket (31) or support bracket (32) and
clamp in place securely.
85. Using a 19/32- inch drill bit and slider support bracket (3) as a template, drill holes through front support
bracket (32) or support bracket (31).
86. Install four flat washers (6), two hexagon head capscrews (17), lockwashers (7), and self-locking nuts (5)
through slider support bracket (3), support bracket (32) or support bracket (31), as shown.
87. Position right rear bracket assembly (33) on vehicle frame and clamp in place.
88. Using a 19/32- inch drill bit and right rear bracket assembly (33) as a template center and drill two holes,
marked P, through vehicle frame member.
89. Remove all burrs and sharp edges. Finish all exposed metal areas using a rust inhibitor primer and paint
as specified in Table 7-4, Materials and Parts. Allow for the appropriate time for primer and paint to cure.
4-31



 


Privacy Statement - Copyright Information. - Contact Us

Integrated Publishing, Inc.