| Tweet |
Custom Search
|
|
|
||
 TB 9-2330-337-14
INSTALLATION (continued)
WARNING
Use caution when lifting the supplemental armor. A swinging or shifting
load may cause injury to personnel.
70. Using dawg grips (Table 7-2), a suitable lifting sling, and lifting device, lift and position mid- plate (35)
against engine and pump frame, as shown. Use a floor jack to level and support the mid-plate (35)
against the engine and pump frame, as shown.
71. Align four holes in mid-plate (35) with threaded holes of frame plate (34) and install with four flat
washers (6), lockwashers (7), and hexagon head capscrews (8). Clamp mid- plate (35) in place on engine
and pump frame.
4-27
|
||
|
||
