| Tweet |
Custom Search
|
|
|
||
 TB 9-2330-337-14
INSTALLATION (continued)
NOTE
Install small shims 12500845- 1 through -3 as required to ensure the frame pla te
is straight and even with the valve cabinet.
21. Check the straightness of the frame plate (14) against the valve cabinet at door opening. Shim gap using
small shims as required.
22. Install frame plate (14) on the valve cabinet with eight flat washers (6), four hexagon head capscrews
(18), lockwashers (7), and self-locking nuts (5). Hand tighten self- locking nuts.
NOTE
Install large shims 12500846-1 through -3, as needed, to ensure the frame plate is
straight and even with the valve cabinet. Do not shim the area between the center
support bracket and left front bracket assemblies.
23. Check the straightness of the frame plate (14) against the valve cabinet and fender of vehicle. Shim gap
using large shims as required.
24. Install frame plate (14) on valve cabinet with eight flat washers (6), four hexagon head capscrews (17),
lockwashers (7), and self-locking nuts (5). Hand tighten self- locking nuts.
25. Install frame plate (14) on left front bracket assembly (9) with four flat washers (6), two hexagon head
capscrews (8), lockwashers (7), and self-locking nuts (5). Hand tighten self-locking nuts.
26. Torque support bracket and frame plate hardware to 55-65 lb-ft (75-81 Nm).
4-12
|
||
|
||
