| Tweet |
Custom Search
|
|
|
||
 TB 9-2330-336-14
INSTALLATION (continued)
65. Using a 19/62- inch drill bit and filter mid- plate (36) as a template, drill two holes, marked K, through
engine and pump frame, as shown.
66. Using a 27/64- inch drill bit and filter mid- plate (36) as a template, drill two holes, marked J, through right
front bracket assembly (31), as shown.
67. Use a 1/2-13 tap to thread through holes J in right front bracket assembly (31), as shown.
68. Remove all burrs and sharp edges. Finish all exposed metal areas using a rust inhibitor primer and paint
as specified in Table 7-4, Materials and Parts. Allow for the appropriate time for primer and paint to cure.
4-21
|
||
|
||
