Quantcast INITIAL INSTALLATION (Cont) - TB-9-2330-329-14-P-10085

Custom Search
 
  
 


TB 9-2330-329-14&P-1
INITIAL INSTALLATION (continued)
76. Position center fender panel (57) on front fender panel (56). Align holes of center fender panel
(57) with holes in front fender panel (56) and install with four flat washers (3), two capscrews (9),
and two self-locking nuts (2). Do not fully tighten hardware.
77. Install center fender panel (57) on tube canister bracket (55) with four flat washers (3), two
capscrews (9), and two self-locking nuts (2). Do not fully tighten hardware.
78. Position rear fender panel (58) on center fender panel (57). Align holes of rear fender panel
(58) with holes in center fender panel (57) and install with four flat washers (3), two capscrews
(9), and two self-locking nuts (2). Do not fully tighten hardware.
79. Install rear fender panel (58) on two tube canister brackets (55) with eight flat washers (3), four
capscrews (9), and four self-locking nuts (2). Do not fully tighten hardware.
4-27



 


Privacy Statement - Copyright Information. - Contact Us

Integrated Publishing, Inc.