INITIAL INSTALLATION (Cont) - TB-9-2330-329-14-P-10077

Custom Search

Back
INITIAL INSTALLATION (Cont)

Up
TB-9-2330-329-14-P-1 Tanker Ballistic Protection System (TBPS/AOA/FTSS) for Semitrailer Tank Fuel 5000-Gallon M967A2P1 Manual

INITIAL INSTALLATION (Cont)

TB 9-2330-329-14&P-1

INITIAL INSTALLATION (continued)

47. Install panel bracket (40) on crossmember (39) with two flat washers (3), capscrew (9), and self-

locking nut (2). Do not tighten hardware.

48. Install rear panel plate B (41) on panel bracket (40) with four flat washers (3), two capscrews (9),

and two self-locking nuts (2). Do not tighten hardware.

49. Install rear panel plate B (41) on piping frame housing (42) with two flat washers (3),

capscrew (9), and self-locking nut (2). Do not fully tighten hardware.

50. Clamp rear panel plate B (41) on piping frame housing (42) as shown. Using 19/32 inch drill bit

and rear panel plate B (41) as a template, drill a hole through piping frame assembly (42) at

location marked A, as shown.

4-19