Quantcast INITIAL INSTALLATION (Cont) - TB-9-2330-329-14-P-10072

Custom Search
 
  
 


TB 9-2330-329-14&P-1
INITIAL INSTALLATION (continued)
28. Install rear fender panel bracket (30) on rear fender panel (29) with four flat washers (3), two
capscrews (9), and two self-locking nuts (2). Do not fully tighten hardware.
29. Install rear fender panel bracket (30) on rear fender with four flat washers (32), two capscrews
(33), and two self-locking nuts (31). Do not fully tighten hardware.
30. Raise two fender brackets (12) parallel with fender. Tighten all fender bracket hardware.
Torque self-locking nuts to 55-65 lb-ft (75-88 Nm).
31. Tighten all rear fender panel hardware. Torque self-locking nuts to 55-65 lb-ft (75-88 Nm).
4-14



 


Privacy Statement - Copyright Information. - Contact Us

Integrated Publishing, Inc.