Quantcast INITIAL INSTALLATION (Cont) - TB-9-2330-329-14-P-10071

Custom Search
 
  
 


TB 9-2330-329-14&P-1
INITIAL INSTALLATION (continued)
24. Position center fender panel (28) on front fender panel (27). Align holes of center fender panel
(28) with holes of front fender panel (27) and install with four flat washers (3), two capscrews (9),
and two self-locking nuts (2). Do not fully tighten hardware.
25. Install center fender panel (28) on fender bracket (12) with four flat washers (3), two capscrews
(9), and two self-locking nuts (2). Do not fully tighten hardware.
26. Position rear panel (29) on center fender panel (28). Align holes of rear fender panel (29) with
holes of center fender panel (28) and install with four flat washers (3), two capscrews (9), and
two self-locking nuts (2). Do not fully tighten hardware.
27. Install rear fender panel (29) on fender bracket (12) with four flat washers (3), two capscrews
(9), and two self-locking nuts (2). Do not tighten hardware.
4-13



 


Privacy Statement - Copyright Information. - Contact Us

Integrated Publishing, Inc.