Quantcast INITIAL INSTALLATION (Cont) - TB-9-2330-329-14-P-10066

Custom Search

TB 9-2330-329-14&P-1
7. Install gap adjustment cover (15) and angle brace (14) on support plate (13) with four flat
washers (3), two capscrews (9), and two self-locking nuts (2). Do not fully tighten hardware.
8. Position support plate (13) on crossmember. Align holes of support plate (13) with existing
holes of crossmember and install with ten flat washers (3), five capscrews (9), and five self-
locking nuts (2). Do not fully tighten hardware.


Privacy Statement - Copyright Information. - Contact Us

Integrated Publishing, Inc.