FTSS SYSTEM PROCEDURE - TB-9-2330-329-14-P-10034

Custom Search

Back
VEHICLE PREPARATION (Cont)

Up
TB-9-2330-329-14-P-1 Tanker Ballistic Protection System (TBPS/AOA/FTSS) for Semitrailer Tank Fuel 5000-Gallon M967A2P1 Manual

INITIAL INSTALLATION

TB 9-2330-329-14&P-1

FTSS SYSTEM PROCEDURE

The source and application of the FTSS System is proprietary. For vehicle preparation, applications,

and reapplication of the FTSS System, contact VSE Corporation, 2550 Huntington Avenue, Alexandria,

VA 22303-1499. Or you may submit your request by phone (800) 455-4873 or fax (703) 960-2688.

INITIAL INSTALLATION

NOTE

Perform the following task after the FTSS coating has been

applied, dried, and inspected.

Refer to Table 3-1, FTSS Kit Contents List, for a list of all parts

installed during this procedure.

1. Cut two hoses (1) 5 inches (13 cm) from bulk rubber hose.

2. Cut two hoses (4) 42 inches (107 cm) from bulk rubber hose.

3. Install two drain hoses (1) and drain hose nipples (3) on semitrailer with four tube clamps (2).

4. Install two drain hoses (4) on drain hose nipples (3) with two tube clamps (2).

3-20