Quantcast VEHICLE PREPARATION (Cont) - TB-9-2330-329-14-P-10031

Custom Search
 
  
 


TB 9-2330-329-14&P-1
VEHICLE PREPARATION (continued)
49. Install two tube canister brackets (145) on crossmember (128) with six capscrews (149), six
self-locking nuts (147), and twelve flat washers (148). Do not tighten hardware.
50. Install two tube canister brackets (145) on fender (138) with eight flat washers (144), four
capscrews (143), and four self-locking nuts (146). Torque self-locking nuts
to 30-35 lb-ft (41-48 Nm).
51. Torque self-locking nuts (147) to 55-65 lb-ft (75-88 Nm).
NOTE
The rear fender tube canister bracket does not mount to a crossmemeber.
52. Position rear tube canister bracket (145) on fender (138), ensure tube canister bracket (145)
captures ABS marker light cable (150) through slot, and install with four flat washers (144),
two capscrews (143), and two self-locking nuts (146). Torque self-locking nuts
to 30-35 lb-ft (41-48 Nm).
3-17



 


Privacy Statement - Copyright Information. - Contact Us

Integrated Publishing, Inc.