Custom Search
 
  
 


DRAFT
TB 9-2320-279-12-1
0004
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
HEMF03084
38. Set POWER switch (38) to ON position.
39. Set HIGH IDLE switch (39) to CONTINUOUS.
40. Push and release LATCH switch (40). Engine speed will increase to approximately 1500 rpm.
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
HEMF03083
WARNING
Keep out from under retrieval system and disabled vehicle when raised off ground
or personal injury or death may result.
CAUTION
Make sure all rigging is secure. Loose rigging can become entangled and cause
equipment damage.
Fully retract two tow cylinders before lifting disabled vehicle or damage to
equipment may result.
41. Push in LIFT CYLINDER control lever (6) to retract lift cylinder (41) to raise disabled vehicle approximately
1 ft. (30 cm) off ground.
42. Adjust slack in two 16 ft. (4.9 m) safety chains so chains between crosstube (7) and wrecker are
approximately 1 ft. (30 cm) off ground.
0004-10



 


Privacy Statement - Copyright Information. - Contact Us

Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business