b. Cab Armor Installation (Cont'd).
18. INSTALL REAR WINDOW GRILL
Position two angle brackets so the slots are as high as possible on rear window opening and
secure with existing armor.
Install pin and lanyard through round hole on driver side angle bracket.
Position adapter on rear window grill and secure with existing hardware.
Position rear window grill with adapter on driver side and install on angle brackets. Secure
with pin and lanyard.
19. INSTALL OPERATOR PEDALS
Position brake pedal on driver side floor plate and secure upper right hand corner with bolt
(B1821BH025C075N), lock washer (MS35338-44), and washer (MS27183-52).
Position gas pedal on driver side floor plate and secure the right most holes with bolt
(B1821BH025C075N), lock washer (MS35338-44), and washer (MS27183-52). Secure the
remaining holes with bolts (B1821BH025C150N), washers (MS27183-52), and lock nuts
20. INSTALL SEAT BELTS
Install bolt (31, B1821BH050C150N), two washers (32, MS27183-17) and lock nut (33,
M45193/2-8CG8Z) in rear corner of middle floor plate (2).
Install bolt (x, B1821BH050C150N), two washers (x, MS27183-17), and lock nut (x, M45193/2-
8CG8Z) in rear corner of passenger side floor plate (x).