Quantcast Removal of Existing Parts and Preparation for Installation. (Cont) - TB-9-2320-273-13-P-10143

Custom Search
 
  
 


a. Removal of Existing Parts and Preparation for Installation (Cont'd).
16.
REMOVE DASH FANS
Reference: TM9-2320-283
Set aside for use with installation.
17.
DETACH GEAR SHIFT FROM FLOOR
Reference: TM9-2320-283
18.
REMOVE REAR WINDOW GRILL
NOTE
Do not remove rear window glass.
Reference: TM9-2320-283
Set aside for use with installation.
19.
REMOVE WINDSHIELD WIPER BLADES
Reference: TM9-2320-283
Remove wiper blades from wiper arms and discard blades.
Set wiper arms aside for use with installation.
20.
REMOVE WINDSHIELD
Reference: TM9-2320-283
Cut gasket from outside for easier removal.
Tag and store all removed parts.
21.
REMOVE DOOR LOCK LOOPS FROM DOOR FRAME.
Reference: TM9-2320-283
If loops are bolted on, remove hardware and loops.
Tag and store all removed parts.
If loops are riveted on, cut loops off. Discard loops.
22.
REMOVE SPARE TIRE
Reference: TM9-2320-283
Set aside for use with installation.
23.
LOOSEN EXHAUST STACK
Reference: TM9-2320-283
24.
REMOVE CAB MOUNTS, FRONT AND REAR
Reference: TM9-2320-283
Discard cab mounts.
25.
INSTALL NEW CAB MOUNTS, FRONT AND REAR
Reference: TM9-2320-283
5/(6 blank)



 


Privacy Statement - Copyright Information. - Contact Us

Integrated Publishing, Inc.